Product Name: 300L/Hour Single-Stage Reverse Osmosis System
Suitable Water Quality: Municipal Tap Water
System Desalination Rate: 98%
System Recovery Rate: 50%-75%
Operating Time: Can operate continuously for 24 hours
Membrane Replacement Time: 1-3 years
Filtration Standard: Filtered water is directly drinkable
Frame Material: 304 Stainless Steel
Dimensions: 1300*600*1700mm
Bare Unit Weight: 130kg
Pipe Diameter: DN20
Power: 1.1KW
Voltage: 220V Single Phase
 

This is a very inexpensive and compact water purification system, the smallest in size compared to similar systems. This design is feasible and common under specific conditions (such as sufficient pressure in the raw water), primarily used in laboratories or small industrial settings.

Production Capacity: 300 liters/hour (at a standard water temperature of 25℃)

Core Components: High-pressure pump (provides the pressure required for the reverse osmosis process), precision filter (also known as a security filter, serving as the final protection for the incoming water), reverse osmosis membrane (typically a polyamide composite membrane, with a desalination rate ≥98%)

Key Prerequisite: The incoming water must have sufficient and stable pressure (typically ≥2-3 kg/cm²) to meet the inlet requirements of the precision filter and high-pressure pump.

Suitable Raw Water: Municipal tap water (good water quality, with turbidity, residual chlorine, hardness, etc., meeting the inlet requirements of the reverse osmosis membrane).